After installing igniter and making gas connections, verify that
they are tight and that no leaks are present using a solution of
soapy water or a commercially available leak-check solution.
Position Your Tank
(if applicable)
1.
Remove door, connect the propane hose/regulator to the
propane tank and hand-tighten (DO NOT USE A WRENCH) and
slide the propane tank past the dotted line to ensure the door
closes properly. This process is the same for both rectangular and
square Pine Ridge models.
2.
With tank inside base, ensure that no hoses, wires, or anything
else is kinked or touching the burner pan.
Finishing Touches
Scatter the included glass beads evenly on to
burner surface using all of the beads that came
with your fire pit.
DO NOT BURN WITHOUT GLASS OR OTHER
DECORATIVE MEDIA PRESENT
