4
Included with your Fire Pit
A.
4 Fasteners
B.
4 B-Bolts
C.
4 C-Bolts
D.
4 Bolt Caps
E.
Touch-Up Paint Bottle
Assembly Instructions
55
1.
Unpack contents from box, and remove individual packaging from each
piece.
2.
Lay Side Panel with Control Panel on soft, flat surface.
3.
Position Support Piece on the Side Panel. NOTE: It is very important to
positon the Support Piece as shown in the picture below, to ensure that
your burner and propane tank fit correctly with your fire pit table base.
Assembly Instructions
INSTALL NOTE:
Final tightening of bolts should be completed following
installation of all panels.
1.
Unpack all the contents from the box and remove the individual
packaging from each component. Remove 4 pre-installed bolts (Bolt A)
from the underside of the Top.
2.
Carefully lay the Top, with underside facing upwards, on a soft and flat
surface. Attach Panel A using Bolt A (x2) as shown below.
3. Attach Panel B on the opposite side of Panel A using Bolt A (x2)
as shown below.
