outdoorrooms.com
3
ASSEMBLY INSTRUCTIONS
•
Do not discard any packaging until assembly is complete and unit is tested.
•
Keep all included manuals in a safe place for future reference.
•
Two people are recommended to remove table from packaging.
•
Place table in desired location before installing control valve and gas
connection.
Exposed edges may be sharp, use leather gloves
when removing packaging and handling the base.
2.
!
!
CF-SPARKER
A. UNPACKING
B. CF-SPARKER INSTALLATION
CONTROL PANEL
WARNING
• Remove CF-SPARKER cap and hex nut. Insert AAA battery
(not included)
with + end out.
• Unscrew mounting screws from control valve. Install CF-SPARKER
on to control panel as shown below. Reconnect mounting screws and
control valve to control panel.
• Press in CF-SPARKER button to test your sparker.
CONTROL VALVE
