7
Thermocouple Installation
•
Refer to Crystal Fire® Plus instruction manual for
detailed attachment of thermocouple.
•
Attach thermocouple to burner valve as shown below.
Electrode Installation
Plug both BLACK wires hanging from the burner into the back
of the CF-SPARKER. If an orange wire is present, do not use it.
The orange wire is for Direct Spark Ignition system only.
Test system by pushing the button on the igniter. Consult the
troubleshooting section of the Crystal Fire® Plus Burner
Owner’s Manual, if the spark is weak, intermittent, or not
present.
