CF-1242 AU Rev-B 3/19/15
Inspect
Maintenance Tasks
Burner Assembly
1
Remove decorative glass and examine burner. Vacuum and wipe
out as needed. Use caution when cleaning these areas
2
Inspect for warping and corrosion. Repair as necessary
3
Verify air shutter area is clean
Burner Ignition and Operation
1
Verify all gas connections are tight and leak-free
2
Clean burner top, inspect for plugged ports, corrosion, or
deterioration. Replace burner if necessary.
3
Inspect for flame problems.
4
Verify air shutter is clear of dust and debris and is in correct
position for the gas type being used.
5
Inspect injector for soot, dirt, or corrosion
6
Verify inlet and test point pressures. Adjust regulator as required.
8
Service and Maintenance
Although the frequency of appliance servicing and maintenance will
depend on use and the type of installation, an authorized service
technician should perform an appliance check-up annual.
Storage of an appliance indoors is permissible only if disconnected
and removed from the gas supply.
The use of a vinyl table cover is highly recommended to keep your
table and burner looking new and ensuring extended trouble-free
operation.
Maintenance and Service Tasks
For service calls: Contact the dealer your product was purchased from first.
Contact the Outdoor GreatRoom Company at 1-651-287-7460 or [email protected] if further assistance is needed.
Authorized
