13
Operational Procedures
Starting a fire in the furnace
STEP 1 : Perform the following pre-firing checks.
Does the firebox door move freely and seal?
Does the combustion fan operate?
Is the furnace water level correct ?
Is the flue free from obstructions?
Are there any leaks?
Is the blower damper flap able to move freely?
Is the pump circulating properly?
STEP 2 : Place paper or cardboard in firebox
approximately 3/4 the way back.
STEP 3 : Place approximately 1 bushel of dry kindling on the front side of the paper
in a loose random fashion as shown.
Always open door slowly!
CAUTION!
Hot surfaces.
Keep children away. Do not
touch during operation.
LOAD FUEL CAREFULLY OR DAMAGE MAY RESULT
NOTE:
Establish a routine for firing techniques. Check daily for creosote build up un-
til experience shows how often cleaning is necessary. Have a clearly understood
plan to handle a runaway fire.
Summary of Contents for Elite Heat 4868P
Page 26: ...26 Wiring Diagram ...