Congratulations on purchasing another quality product from Outdoor Connection.
The Outdoor Connection Easy Up Tent is very quick and simple to erect and pack
up. Please read these simple instructions before use. It is recommended that you
erect and pack the tent before travelling so that you can familiarise yourself with
these procedures.
CARE INSTRUCTIONS
- KEEP ALL HEAT AND FLAME SOURCES AWAY FROM EASY UP TENT.
- NEVER use any gas, flame source or heating appliances in or near your Easy Up Tent.
The pre-tied guy ropes must be used at all times to help stabilise and help prevent any
damage to your Easy Up Tent. Your Easy Up Tent is not covered under warranty for wind
and/or storm damage.
- Your tent must be stored away DRY and CLEAN; it also must be kept in a dry area off the
ground to help prevent any moisture build-up and/or mildew developing.
- At the first sign of bird droppings or sap from a tree, clean off straight away; if left, this can
damage the fabric.
- If the Easy Up Tent has been used near the sea, hose down the entire shelter to remove
salt spray residue (particularly zip slides and any metal parts) and dry thoroughly before
storing.
- Do not pitch your Easy Up Tent under dead tree branches or under trees known to drop
branches.
- Do not open or use the tent on hard surfaces as the abrasion may damage the fabric.
PITCHING INSTRUCTIONS
1. Select an area to pitch your tent. The area should be level and clear of any sharp objects,
sticks and stones. Avoid dips and hollows where water can pool. Avoid sites under trees if
possible because of bird droppings, tree sap and falling branches.
2. Remove the tent from the carry bag and carefully allow it to unfold, then open it fully. Take
care as it may spring open quickly.
3. Peg out tent using the eyelets around the edge.
4. Peg out the guy ropes.
1. Remove all the pegs. Never pull the pegs out with the
tent peg tabs, always use a peg puller or another peg.
2. Make sure the doors are open, this will help any expel
any trapped air.
3. Gather the poles together, starting with the top two
poles. (A, B)
4. Stand the tent on its end making sure the strap is at the
bottom (toward the ground). (C)
5. Keeping all poles in one hand, use the other hand to push
down the top of the tent bending it back onto the tent
itself. (D)
6. As the tent bends two loops will form (E). Tuck the left
hoop under the right hoop (F, G) then simply attach the
strap. Do not force it as this may damage the frame. If it
does not fold easily start again. (H)
7. Adjust the size of the coils if necessary then place it in its
carry bag. (I)
