Items Needed
:
!
(a) 2 -‐ Front Frame Sides
(b) 1 -‐ Front Seat Plate Assembly
(c) 1 -‐ Front Support Bar
(d) 2 -‐ Rear Frame Sides
(e) 1 -‐ Rear Seat Bar Assembly
(f) 1 -‐ Rear Cargo Deck
14 -‐ Springer Clips
Set Up - Step 2 - Frame Assembly:
1. Locate the front frame sides, the front seat plate assembly and front support bar. Slide
the frame sides onto the front seat plate assembly and secure with (6) springer clips.
2. Locate the rear frame sides and the rear seat bar assembly. Slide the frame sides onto
the rear seat bar assembly and secure with (4) springer clips.
3. Connect the front and rear frame sec<on using (2) springer clips.
Items Needed
:
!
1 -‐ Assembled Frame
(g) 3 -‐ Piece Leaning Bar
2 -‐ Springer Clips
4 -‐ 1.75” Hex Blots
4 -‐ Seat Knobs
Set Up - Step 3 - Lean Bar Assembly:
1. Connect the U-‐shaped sec<on and the 2 straight sec<ons of the lean bar together,
securing them with (2) springer clips.
2. Align the holes located in the front sec<on of the frame with the rounded lean bar
plates and secure the lean bar to the frame with (4) hex blots and (4) seat knobs.
Items Needed
:
!
1 -‐ Assembled Frame
(h) 1-‐ Front Cas<ng Pla>orm
2 -‐ Clevis Pins
4 -‐ Small Washers
2 -‐ Split Rings
Set Up - Step 4 - Front Casting Platform Installation:
1. Place the cas<ng pla>orm in front of the front seat p;ate assembly. Align the holes and
use the (2) clevis pins, (4) small washers and (2) split rings to secure the cas<ng
pla>orm the the Fish Cat 13 frame.
b
a
c
d
e
f
g
h
www.outcastboats.com
~ 800-966-0976
