A
A
A
A
A
A
A
A
B
B
B
B
A
A
A
A
B
B
CTC161414SH(076-5461-2)
ASSEMBLY INSTRUCTIONS
Step 1: Verify package contents
Screen : 1 each
(A) Main 4 each(Black)
(B) Roof 2 each
(Red)
Step 2: Assemble poles
1) Assemble the
screen house
poles by
placing fibreglass sections into the metal
ferrules. Six poles are provided:
4 each (A) Main
2 each (B) Roof (Red)
Tent stakes : 16 each
Fibreglass poles : 6 each (total)
Step 3: Spread screen house, insert poles
1) Spread out screen house on flat, clean and
level surface area. Zippered openings
should be closed for proper assembly.
2) Locate roof pole sleeves and insert roof
poles (B) so the poles cross at top of the
screen house.
3) Locate main pole sleeves and insert main
poles (A).
Step 4: Secure roof poles
1) With a person holding each end of a red
roof pole (B), flex the pole into an arch.
Carefully place the ends into the webbing
pockets located at the middle of
screen house.
2) Repeat this step for the second roof pole.
Step 7: Fasten hooks
1) Clip the plastic hooks on the screen house
to the fibreglass pole frame.
Step 5: Secure main poles
1) Follow the same procedure for the main
poles (A). With a person on each end,
gently flex the pole and place the pole ends
onto the pins located at the stake loops.
2) Repeat this step for the remaining
main pole.
Step 6: Stake screen house
1) Stake down the screen house by inserting a
stake through the stake loops, located
along the perimeter of the screen house.
2) Make certain the screen house is pulled out
evenly and tightly, allowing lower perimeter
of screen house to remain on the sod.
3) Hammer the stakes into the ground at a
45
0
angle using a hammer or mallet.
B
B
CTC161414SH 05/15
SCREEN HOUSE
IMPORTANT NOTES:
* Assemble your screen house before camping
to become familiar with the assembly.
* Two people are recommended for setup.
* Select a clean, level area for the campsite, free
of debris and sharp objects, away from any
natural watercourse.
* To prevent damage to the zippers, unzip the
doors and windows of the screen house prior
to disassembly.
