background image

CTC171408 (076-5454-0)

ASSEMBLY INSTRUCTIONS

Step 1: Verify package contents

Tent : 1 each

Step 3: Spread tent and insert poles

Step 2: Assemble poles

1) Assemble the tent poles by placing 
     fibreglass sections into the metal ferrules.
     Six poles are provided:

(A) Main 2 each(Black)

(B) Side 2 each(Yellow)

(C) Roof 1 each(Black)

(D) Fly 1 each(Black)

Rainfly : 1 each

Fibreglass Poles :  6 each (total)

2 each (A) Main Poles

(Black)

2 each (B) Side Poles (Yellow)

1 each (D) Fly Pole

(Black)

IMPORTANT NOTES:

* Assemble your tent before camping to become    
   familiar with the assembly.
* Two people are recommended for setup.
* Select a clean, level area for the campsites, free                      
   of debris and sharp objects, away from a  

 

   natural watercourse.
* Use of a ground cloth is recommended to
   prolong the life of the tent floor and provide
   additional insulation and moisture protection.
* To prevent damage to the zippers, unzip the
   doors and windows of the tent prior to 
   disassembly, allowing air to move freely.
* Seam seal the inside stitched seams of the tent.
   This will improve weather resistance. Available 
   in sporting goods departments. Discolouration
   may occur if applied to outside seams.

1 each (C) Roof Pole

(Black) 

1) Spread out the tent flat, floor-side down.
2) Using the illustration below as a guide, slide the short roof  pole (C) through the sleeve at the 
     centre of the roof. Insert the tipped ends into the gromments located in the adjacent pole 
     sleeve.
3) Slide each main pole (A) through the pole sleeves located over the front door and at the rear 
     of the tent.
4) Insert the side poles through the pole sleeves over the windows.

Step 4: Raise the tent

1) Starting at the front of the tent, have one person place and hold a main tent pole (A) onto the     
     pin located at corner of the tent.
2) The second person takes hold of the other end of the same pole. The pole is then flexed into   
      an arch and carefully placed onto the corresponding pin.
3) Repeat this process for the second main pole (A) and 2 side poles (B).
4) Clip the plastic hooks on the tent to the fibreglass pole frame.

Tent Stakes : 13 each

Divider : 1 each

CTC171408  08/16

A

A

B

B

C

Summary of Contents for 076-5454-0









Reviews: