15
9.5. Drip Tray
After every use, empty and clean the drip tray
(and foil liner, if applicable) of any fat or food
particles, using a plastic or wooden scraper if
necessary.
Failure to keep it clean, and excessive build up
can result in a fat fire. This can be hazardous
and severely damage the barbecue.
This is not
a fault in the barbecue and is therefore not
covered by the terms of the warranty.
If
required, the tray can be washed in hot soapy
water.
9.6. Barbecue Body
Regularly remove excess grease or fat from the
barbecue body using a cloth wrung out in hot
soapy water and dry thoroughly. Excess fat and
food debris can be removed from inside the
body using a soft plastic or wooden scraper. It
is not necessary to remove all the grease from
the body. If you need to clean fully, use hot
soapy water and a cloth, or nylon-bristled brush
only. Do not use abrasives. Remove cooking
surfaces and burners before full cleaning. Do
not immerse the gas controls or manifold in
water. Check burner operation after carefully
refitting into body.
9.7. Barbecue Hood or Lid
Use a non-abrasive cloth or pad and clean with
hot, soapy water. Do not use scouring pads or
powders as they can permanently damage the
finish.
9.8. Trolley
Wipe with a cloth wrung out in hot soapy water
and dry.
The wood used in the manufacture of your
barbecue is a hardwood suited to outdoor use.
Hardwood will naturally weather and change its
appearance. It is quite natural for small cracks
to appear on the surface of the wood. The wood
should be regularly inspected and any
weathered or damaged surfaces should be
sanded and recoated promptly with a hardwood
garden furniture varnish or paint, following the
manufacturer’s instructions for preparation and
application.
9.9. Fixings
All screws and bolts, etc. should be checked
and tightened on a regular basis.
9.10. Storage
Ensure the barbecue is properly cooled before
covering or storing. Store your barbecue in a
cool dry place.
Cover the burners with aluminium foil in order to
prevent insects or other debris from collecting in
burner holes.
If the barbecue is to be stored indoors, the gas
bottle must be disconnected and left outside.
The gas bottle should always be stored outside,
in a dry, well-ventilated area, away from any
sources of heat or ignition. Do not let children
tamper with the bottle.
When using the barbecue after extended
periods of storage follow the cleaning
procedures.
10. Technical Specifications
Specifications subject to change without prior notice.
CE
Approval
Heat
Input
Burners
Injector
Size
Gas /Pressure
Outback®
Spectrum
2 Burner
Flatbed
0359
359BR665
9.52
kW
2
1.07mm
1.07mm
28-30 mbar Butane
or 37 mbar Propane
30 mbar LPG mixture
Outback®
Spectrum
3 Burner
Flatbed
0359
359BR665
14.28
kW
3
1.07mm
1.07mm
28-30 mbar Butane
or 37 mbar Propane
30 mbar LPG mixture
Gas Consumption:
Outback® Spectrum 2 Burner Flatbed: 693g/hr
Outback® Spectrum 3 Burner Flatbed: 1039g/hr
Countries of Use:
I
3+ (28-30/37)
BE, CH, CY, CZ, ES, FR, GB, GR, IE, IT, LT, LU, LV, PT,
SK, SI
I
3B/P(30)
BE, CY, CZ, DK, EE, FI, FR, HU, IT, LT, NL, NO, SE, SI,
SK, RO, HR, TR, BG, IS, LU, MT
