13
17
Place the Side Burner Grid (C2) onto the
side burner shelf.
ASSEMBLY IS NOW COMPLETE.
PROCEED TO THE NEXT PAGE FOR INSTRUCTIONS ON OPERATION AND
MAINTENANCE
ALL JOINTS AND CONNECTIONS MUST NOW BE
LEAK TESTED
BEFORE USING
THE BARBECUE.
Leak test annually, and whenever the gas bottle is removed or replaced.
LEAK TESTING
Always perform a leak test in a well-ventilated area.
Step 1 -
Confirm all control knobs are in the off position.
Step 2 -
Detach the barbecue control panel located across the front of the barbecue body
by pulling off the control knobs and removing the control panel retaining screws.
Step 3 -
Turn the gas on / open the gas control valve on the gas bottle or regulator
Step 4 -
Check for leaks by brushing a solution of ½ water and ½ liquid detergent / soap
over all the gas system joints, including all valve connections, hose connections, and regu-
lator connections.
Step 5
- NEVER USE AN OPEN FLAME to test for leaks at any time.
Step 6 -
If bubbles form over any of the joints there is a leak
•
Turn off the gas supply at the gas bottle
•
Retighten all joints
•
Repeat test
•
If bubbles form again do not use the barbecue and contact your local Outback distribu-
tor for assistance.
Attach the Warming Rack (A4) to Barbecue
Body (B1) as shown.
18
