6
Attach the table (C6) to the L/H and R/H legs
using the table bracket bolts (D8) and nuts (D9).
D. Assembly
TOOLS NEEDED FOR ASSEMBLY:
Medium size flat blade or Philips/crosspoint screwdriver, adjustable spanner or metric spanner set
Whilst every care is taken in the manufacture of this product, care must be taken during assembly in case sharp edges are
present.
1
3
2
4
Remove the locknuts (C9) and wheel washer(C12)
from the ends of the axle assembly. Attach the axle
assembly (C11) to the L/H legs (C4) and R/H legs
(C5) using the wheel axle bolts (D1).
For Omega
100 users only: the pair of threaded holes on the
legs must face to the inside with the plain face
on the outside. For Omega 200 users only: the
pair of threaded holes on the legs must face to
the inside with the 2 pairs of threaded holes
facing on the outside.
Attach the wheel washer (C12) to the axle. Slide
the wheels (C10) onto the axle assembly, and
replace the locknuts on the axle ends to secure
the wheels.
Align the tabs on the inside of the hubcaps
(C8) with the holes in the hubs of each wheel
(C10) and press into place.
C8
C11
C4
C5
D1
C9
C10
C12
