background image

17 

Important Information

 

 

Please  read  these  instructions  carefully 
before assembly and use of your barbecue. 
 

 

Retain 

these 

instructions 

for 

future 

reference.

 

 

This product is for outdoor use only. Do not 
use indoors. 

 

 

Do not use the barbecue or store gas bottles 
below  ground  level.  LP  gas  is  heavier  than 
air so if a leak occurs the gas will collect at a 
low level and could ignite in the presence of 
a flame or spark.

 

 

For  use  with  LPG  bottled  gas  only.  A 
suitable  regulator  must  be  used  for  butane, 
propane or mixes.

 

 

Remove  plastic  wrap  from  any  part  before 
lighting.

 

 

Do  not  use  within  1m  of  any  flammable 
structure  or  surface.  Do  not  use  under  any 
combustible surface.

 

 

LP  gas  bottles  should  never  be  placed 
directly underneath the barbecue.

 

 

LP  gas  bottles  should  never  be  stored  or 
used  laid  on  their  side,  in  the  horizontal 
position.  A  leak  would  be  very  serious  and 
liquid  could  enter  the  gas  line  with  serious 
result.

 

 

Never store gas bottles indoors.

 

 

Open the barbecue hood before lighting.

 

 

Once  lit,  do  not  move  the  barbecue  until  it 
has completely cooled, after use. 

 

 

This  barbecue  must  not  be  left  unattended 
when lit.

 

 

The hood or lid handle can become very hot. 
Grip  only  the  centre  of  the  handle.  Always 
use  oven  gloves  when  cooking  or  carrying 
out any adjustments to the barbecue.

 

 

Use  purpose  designed  barbecue  tools  with 
long, heat resistant handles.

 

 

Use  Caution  when  opening  the  hood  or  lid, 
as  hot  steam  inside  is  released  upon 
opening.

 

 

Parts  of  this  barbecue  become  very  hot  – 
care  must  be  taken,  especially  when 
children,  elderly  people,  and  animals  are 
present.

 

 

Turn  off  the  gas  supply  at  the  gas  bottle 
after use.

 

 

Never  cover  a  barbecue  until  it  has 
completely cooled.

 

 

Use  this  barbecue  only  on  a  stable,  flat 
surface.

 

 

Before  you  use  your  barbecue,  perform  a 
leak test. This is the only safe and sure way 
to  detect  any  gas  leaking  from  joints  and 
connections of the barbecue after assembly.

 

 

Leak  test  annually,  and  whenever  the  gas 
bottle is removed or replaced.

 

 

Do  not  store  flammable  materials  near  this 
barbecue.

 

 

Do not use aerosols near this barbecue.

 

 

Failure  to  follow  the  manual‘s  instructions 
could result in serious injury or damage.

 

 

Parts  sealed  by  the  manufacturer  or  its 
agent must not be altered by the user.

 

 

Modification  of  the  barbecue  may  be 
dangerous,  is  not  permitted  and  will  nullify 
any warranty.

 

 

If  you  have  any  queries  regarding  these 
instructions, contact your local dealer.

 

 
Gas, Regulator and Hose 

 

This  barbecue  includes  a  regulator  which  is 
suitable for use with Propane Patio Gas bottles. 
For  optimal  performance,  we  suggest  to  use  a 
13kg size gas bottle. Propane bottles will supply 
gas all year round, even on cold winter days. A 
spanner may be required to change gas bottles. 
 

 

The  regulator  should  be  replaced  every  5 
years when stored indoors or every 3 years 
when  stored  outdoors.    If  the  regulator 
malfunctions,  do  not  use  the  appliance  until 
the regulator is replaced. 

 

The  hose  between  the  regulator  and  the 
appliance should be replaced every 2 years, 
even if it does not show any external wear. 

 

The hose should hang freely with no bends, 
twisting,  tension,  folds,  or  kinks  that  could 
obstruct free flow of gas. Always inspect the 
hose  for  cuts,  cracks,  or  excessive  wear 
before use. 

 

Apart  from  the  connection  point,  no  part  of 
the  hose  should  touch  any  hot  barbecue 
parts. If the hose shows any sign of damage 
it  must  be  replaced  with  a  hose  suitable for 
use  with  LP  gas  which  meets  the  national 
standards for the country of use.   

 

A suitable hose must comply with EN16436-
1  or  local  regulation,  and  the  length  should 
not exceed 1.5 metres. 

 
The  regulator  included  with  this  barbecue 
complies  with  EN16129.  YOU  MUST  HAVE 
THE  PROPER  REGULATOR  AND  GAS 
BOTTLE IN ORDER FOR THE BARBECUE TO 

Summary of Contents for OM200H

























Reviews: