5
Assembly
IMPORTANT!
TOOLS NEEDED FOR ASSEMBLY:
Medium size flat blade or Phillips/Crosspoint screwdriver,
adjustable spanner or metric spanner set.
Remove any internal component or packaging from the barbecue body.
Whilst every care is taken in the manufacture of this product, care must be taken during assembly in
case sharp edges are present.
Please read the Important Information section carefully before assembly and use of your
barbecue.
1
2
Attach the Left Cabinet Panel (C14) and the Right Cabinet Panel (C15) to the Bottom Panel (C13)
using M6x35 Bolts (D5x8pcs) and M6 Nuts (D6x8pcs), ST4.0x10 Screws (D1x6pcs) as shown.
C13
Unscrew the Locknuts (D7) from both ends of the Axle (C18).
Slide the axle through the corresponding holes in the left legs. Slide a Wheel (C16) over each end
of the axle. Secure the wheels into place with the locknuts. Place the wheel Hubcaps (C17) onto
the outsides of the wheels.
C16
D7
C17
C15
C14
D1
D5
D6
