Outback Manhattan/Graphite, Assembly And Operating Instructions Manual

Page: 23 / 24

23
Troubleshooting
Problem Possible Cause Solution
Burners will not light
LP gas bottle is empty Replace with full gas bottle
using the ignition system
Faulty regulator Have regulator checked or replace
Obstructions
in burners Clean burners
Obstructions
in gas jets Clean jets and gas hose
or gas hose
Electrode
wire is loose or Reconnect wire
disconnected on electrode
or ignition unit
Electrode or wire is damaged Change electrode and wire
Faulty
integral igniter Replace gas valve complete
with integral igniter
Incorrect electrode gap/ The gas collector box around the
Bent collector box electrode eeds to be in line with the
burner with a gap of 3 to 4mm
between the end of the electrode
and the tag on the end of the
collector box. Realign the collector
box as required.
Burner will not light LP gas bottle is empty Replace with full gas bottle
with a match
Faulty regulator Have regulator checked or replace
Obstructions
in burners Clean burners
Obstructions
in gas jets Clean jets and gas hose
or gas hose
Low flame or flashback (fire LP gas bottle too small Use larger gas bottle
In burner tube - a hissing or
roarIng noise may be heard)
Obstructions in burners Clean burners
Obstructions
in gas jets Clean jets and gas hose
or gas hose
Windy conditions Use BBQ in a more sheltered
position
Gas valve knob difficult Integral ignition system jammed Replace gas valve complete
to turn Gas valve jammed with integral igniter