16
K. Troubleshooting
Problem
Possible Cause
Solution
Burners will not light using
the ignition system
LP gas bottle is empty
Replace with full bottle
Faulty regulator
Have regulator checked or replaced
Obstructions in burners
Clean burners
Obstructions in gas jets or gas hose Clean jets and gas hose
Electrode wire is loose or disconnected
on electrode or ignition unit
Reconnect wire
Electrode or wire is damaged
Change electrode and wire
Faulty integral ignitor
Change ignitor
Burner will not light with a
match
LP gas bottle is empty
Replace with full bottle
Faulty regulator
Have regulator checked or replaced
Obstructions in burners
Clean burners
Obstructions in gas jets or gas hose Clean jets and gas hose
Low flame or flashback
(fire in burner tube— a
hissing or roaring noise
may be heard)
LP gas bottle too small
Use larger bottle
Obstructions in burners
Clean burners
Obstructions in gas jets or gas hose Clean jets and gas hose
Windy conditions
Use BBQ in a more sheltered position
Gas valve knob difficult to
turn
Integral ignition system jammed
Replace integral ignitor
Gas valve jammed
Replace gas valve
For reference and correspondence,
record your serial number here.
(See sticker on side of barbecue body.)
Serial No.
__________________
This number may be required when
ordering spare parts or accessories. A
part reference number may also be
required where applicable.
Published December 2007
