background image

20 

OUTBACK® WARRANTY 

 

OUTBACK® barbecues are warranted to the original purchaser against defects in materials  
and workmanship: 

♦ 

Porcelain coated barbecue bodies, porcelain coated roasting hoods and stainless steel 
roasting hoods are warranted for a period of five (5) years from the date of purchase.

 

♦ 

Stainless steel and cast iron burners are warranted for a period of two (2) years from the 
date of purchase. 

 

♦ 

Other parts are warranted for a period of one (1) year from the date of purchase.

 

 
OUTBACK® will, within above periods, supply replacements for defective parts free of charge  
provided that: 

♦ 

The product has not been used for trade, professional or hire purposes.

 

♦ 

The product has not been subjected to misuse or neglect, including fat fires and flare ups 
or use of a faulty or incorrect regulator. 

 

♦ 

The product has not sustained damage through foreign objects, substances or accidents.

 

♦ 

The care and maintenance instructions given in your Outback manual have been followed.

 

 
If the product includes one or a number of parts or accessories, only the defective accessory 
or part will be replaced i.e. Hose, Regulator, Rotisserie, Piezo Ignitor, Roast Hood and Side 
Burner.  
 
Fat fires are not covered under warranty. 
 
Any warrany & guarantee claims shall be rendered void in the event of improper use of the 
BBQ or the use of non approved fuels, discolouration , rusting or slight deformation of parts 
exposed directly to the flames ( grill /  griddle / flame tamers /  burners ,etc ) do not impair the 
function of the BBQ and do not form a basis for any claims. 
 
This warranty is offered as an extra benefit and is in addition to the customers’ statutory rights. 
 
OUTBACK® does not in any way warranty the gas cylinder. 
 
In the unlikely event that you experience problems with this barbecue, please fill in our 
warranty form at:  
 
http://www.outbackbarbecues.com/warranty-form  
 
One of our colleagues will be in contact with you shortly.

 

For reference and correspondence, record your 
serial number here. 
(See sticker on side of barbecue body.) 

Serial No.

__________________

 

This number may be required when ordering 
spare parts or accessories. A part reference 
number may also be required where applicable. 

HELPLINE NUMBER: 0345 388 6032 

Summary of Contents for Hunter Plus 3





















Reviews: