background image

19 

For  reference  and  correspondence,  record  your 
serial number here. 
(See sticker on side of barbecue body.) 

Serial No.

__________________

 

This  number  may  be  required  when  ordering 
spare  parts  or  accessories.  A  part  reference 
number may also be required where applicable. 

HELPLINE NUMBER: 0345 388 6032 

OUTBACK® WARRANTY 

 

OUTBACK® barbecues are warranted for a period of one (1) year from the date of purchase to 
the original purchaser against defects in materials and workmanship, OUTBACK® will supply 
replacements for defective parts free of charge provided that: 



The product has not been used for trade, professional or hire purposes. 



The product has not been subjected to misuse or neglect, including fat fires and flare ups or 
use of a faulty or incorrect regulator. 



The product has not sustained damage through foreign objects, substances or accidents. 



The care and maintenance instructions given in your Outback manual have been followed. 

 
If the product includes one or a number of parts or accessories, only the defective accessory or 
part  will  be  replaced  i.e.  Hose,  Regulator,  Rotisserie,  Piezo  Ignitor,  Roast  Hood  and  Side 
Burner. 
 
Fat fires are not covered under warranty. 
 
Any  warranty  &  guarantee  claims  shall  be  rendered void  in the  event  of improper  use  of  the 
BBQ  or  the  use  of  non  approved  fuels,  discolouration  ,  rusting  or  slight  deformation  of  parts 
exposed directly to the flames ( grill / griddle / flame tamers / burners ,etc ) do not impair the 
function of the BBQ and do not form a basis for any claims. 
 
This warranty is offered as an extra benefit and is in addition to the customers’ statutory rights. 
 
OUTBACK® does not in any way warranty the gas cylinder. 
 
In the unlikely event that you experience problems with this barbecue, please fill in our warranty 
form at: 
 
http://www.outbackbarbecues.com/warranty-form 
 
One of our colleagues will be in contact with you shortly.

 

Summary of Contents for CK578T




















Reviews: