(8)
Route the FW-SP-250 wires
through to the AC Wiring
Compartment and to the battery
lugs.
(9) Secure the surge protector’s wiring in the appropriate locations and replace the various plastic
covers as per the wiring instructions on page 16.
11
(5) Install the top section of the cover contain-
ing the surge protector fi rst.
(6) The lower secton of the FW-SP-250 slides
inside the FW250 and is then screwed into the
previously installed top section. Removing the
lower section allows viewing the inside of the
FW250 to check the placement of wires and
components.
(7) Both sections of the FW-SP-250 are installed
and secured with six Phillips screws.
