Oursson EK1710P, Instruction Manual

Page: 4 / 16

IntRodUCtIon
4
will invalidate the manufacturer’s warranty.
For repair and maintenance, contact only
authorized service centers meant for repair of
products under the trademark oURsson.
• When moved from a cool to a warm place and
vice versa unpack it before use and wait 1-2
hours without turning it on.
• In order to prevent electrical shock do not immerse
the entire product or the wires into the water.
• Be particularly careful and cautious when using
the device near children.
• do not touch any moving parts, as this may
cause injury.
• the power cord is specially made relatively
short in order to avoid the risk of injury.
• do not allow the cord to hang over the sharp
edge of the table or touch hot surfaces.
• do not connect this device to a grid which is
SAFETY INSTRUCTIONS
Danger symbol
A reminder to user about high voltage.
Warning symbol
A reminder to user about the necessity of operating exactly according to the instructions.
When using electrical appliances should take
the following precautions:
• Use the device according to the following
instructions manual.
• Install the device on a stable surface.
• Use only the tools, which are included in the
product set.
• to protect against risk of electrical shock do not
put the cord in water or other liquid. If for some
reason the water got into the unit, contact an
authorized service center (AsC) oURsson AG.
• For power supply, use a power grid with proper
characteristics.
• do not use the device in areas where the air
can contain vapors of flammable substances.
• never attempt to open the device by yourself –
it could possibly be the reason of an electrical
shock can lead to product malfunction and