Ouring 3DTALK Fab460 Plus, Instruction

Page: 17 / 36

时间环三维科技有限公司
17
3.3 Printing plate adjusting/automatic adjusting
With the automatic plate adjusting,convenient extruder adjusting and plate interval
adjusting,3DTALK Fab460 Plus can realize the controlling of the plate,extruder and plate interval
adjusting just by several steps.
Warning before adjusting

Please make sure the black PC frosted paper or textured tap has been stuck well on the printing
plate before adjusting

Make sure the printing plate and extruder is clean

The spring button on the bottom of the printing plate:spin the spring clockwise,the
corresponding plate is declining;
3.3.1 Initializing plate adjusting
1
Press the
[control] button,and press the
[Reset] button to make the plate
move to the zero point.By pressing the up down button in the Z axis,we can make the plate
move up to the point closed to the nozzle(picture 1).
（picture 1）
2
Press (Picture 1) the arrows button in turn to make the extruders move to the plate above
the 4 spring buttons.Spinning the spring button, then the vertical distance from the 4 plates
to extruders will almost be the same.