background image

Entering the code: 

•  Turn  the control knob and press OK to accept each number.

•  Press ESC to return to the previous digit.

•  Press OK for a number of seconds to accept the code.

•  Press ESC for a number of seconds to cancel. 

SMS-PIN: 

If the SIM card has PIN inquiry in use, device asks you to enter the PIN.

1.  Go to “System settings” -> “SMS settings” and Enter the 

PIN code of your GSM subscription.

2. 

Switch the device off. 

3.  Connect the modem  

        USB-connector to the device USB host  

 connector. 

        Connect the modem power supply to the device   

        conectors 93 and   .

4.  Switch the power on to the both devices and the controller 

initializes the modem and detects the message center (the 

message center number is not visible on the display).

5.  Check the signal strength and status of modem from de-

vice display

6.  Enter Device ID (optional).

7.  Test the SMS communication. Send a message to controller:  

Keywords. If the controller replies with a message containing a 

list of key words, text message communication is ok. If the con

-

troller doesn’t send a text message. If the controller doesn’t re

-

ply, you can check the validity of the subscription using a mobile 

Device:System settings ->SMS setting

Mode

Explanation / Instructions

Ok

The modem is ready for use.

Not connected

The modem is not connected or the connection is incorrect.

Error

Use the SIM card in your phone and check if the SIM card is locked (PUK code).

PIN error

Enter device the same PIN as as the GSM modem’s SIM card PIN.

Modem status

 The device recognizes whether the modem is connected or not. The device initialises 

the GSM modem automatically. 

 

Device ID: 

It’s possible to define device ID to devicd. Device ID works as a password for SMS commu-

nication. When device ID is in use, it should be added in front of the keyword in every SMS  (e.g. TC01 

INPUTS).

Signal strength

Signal strength is expressed with the following descriptions: ”Excellent”, ”Good”, ”Mode-

rate”, ”Low”, ”Very low” and ”Initialization failed”. If signal strength indicates ”No network,” try changing the 

modem’s location or use an additional antenna. If the signal strength is ”Very low” you should also move 

the modem to another location to try to improve signal strength. If  ”Initialisation failed” is stated, check 

that the SIM card is correctly installed.

GSM-modem connection to the Ouman Plus or Ouflex A device 

 

and taking the mode into use

1

2

ESC

93

1

2

phone. Insert the SIM card in a mobile phone, send a text message to another phone and reply. If the messages go through, 

the subscription is OK. Insert the SIM card back to the GSM modem and test SMS communication again. If controller still 

does not reply, check that the message center number has not been inserted manually. Press OK button for a few seconds to 

display hidden menus. Remove message center number: clear the first digit and press OK button for a few seconds. Switch 

power off and back on. Controller retrieves the message center number automatically (the message center number is not vis

-

ible on the display). 

8. 

Retest the text message communication.

We reserve the right to make changes to our products without a special notice.

Product disposal:  

The enclosed marking on the additional material of the product indicates that this product must 

not be disposed of together with household waste at the end of its life span. The product must be processed sepa-

rately from other waste to prevent damage caused by uncontrolled waste disposal to the environment and the 

health of fellow human beings. 

The users must contact the retailer responsible for having sold the product, the supplier or a local environmental 

authority, who will provide additional information on safe recycling opportunities of the product. This product must 

not be disposed of together with other commercial waste.

7

Summary of Contents for GSMMOD9









Reviews: