3. Power display: After the power is turned on, the dashboard lights up to display the power, and the
power is displayed in 5 grids, corresponding to high, medium and low power.
4. headlight
：
refer to Figure 3, Long “ ” press button headlights Power on/off.
5. start up: Power-assisted riding, short press after power on“ ” Adjust to 1st gear
，
Step on the
bicycle sprocket and start the motor to assist. If motor assistance is not required, turn off the power or
turn off the battery or set the meter to 0.
Function introduction:
1. Charging: Open the plastic cover of the charging hole on the right side of the frame and
connect the charger to start charging. When the battery is full and the charger indicator
turns from red to yellow-green, it means it is fully charged.
2.Power on: Referring to Figure 2, turn on the battery switch; refer to Figure “ ” 3,
Long press button Power on/off.
Figure 3 (Left handle bar)
Figure 1 (Charger port)
Figure 2 (Battery switch)
