22
• Lift the unit and slide it forward into place.
• Tightly screw both hanger bracket setting
bolts (M8).
• Tightly screw both hanger bracket fixing
bolts (M6) to prevent the displacement
of the indoor unit.
• Adjust the height so that rear side of the drainpipe
slightly inclines to improve drainage.
NOTES:
• Adjust the height by rotating the nut with a spanner.
• Insert the spanner into the hanger bracket through the interspace.
• Only the specified accessories and parts for installation work can be used.
• Stuff the gap between pipes and wall hole
with sealing gum.
• Fix the wall pipe.
• Check if the indoor unit is installed firmly to the wall/ceiling.
• Reinstall the side panel and return grille.
Hanger bracket
Hanger bracket setting
bolt (M8)
Hanger bracket fixing
bolt (M6)
Indoor
Wall pipe
Sealing gum
Outdoor
