19
Step 2: Install installation template
• Refer to the installation template provided
with the unit for dimension of ceiling ope-
ning.
• The centre of the ceiling opening is marked
on the installation template.
• Install the installation template on the unit
using 3 bolts.
• Fix the angle of the drainage pipe at the
outlet vent using a bolt.
Step 3: Adjustment
Adjust the unit to the suitable install place.
Step 4: Horizontality check
The unit is equipped with integrated drainage pump and float
switch. After the installation of the indoor unit, its horizontality
must be checked to make sure all 4 angles are horizontal. If the
unit is slant toward the opposite side of the water flow, there
may be malfunction of the float switch which may lead to water
leakage.
Step 5: Remove gasket anchor
Remove gasket anchor used to prevent gasket break off and tighten the nut.
Step 6: Remove installation template
NOTE
:
Tighten the nuts and bolts to prevent the unit from falling down.
Installation template
Center of
the ceiling
opening
Bolt (attachment)
Bolt (attachment)
Bolt of one of the angle of outlet pipe is
fixed on the angle of the drainage slot
Install installation template
Water lever
Polyethylene pipe
