55
56
57
6.7.4 Adjusting the posterior lower leg pad on the elevating leg support
The posterior lower leg pad on this leg support is adjustable in height, depth, width and angle.
1)
Height adjustment:
Loosen the Allen head screws on the clamp brackets (see fig. 58, item 1). Slide the pos
terior lower leg pad to the desired height and firmly retighten the Allen head screws.
2)
Depth adjustment:
Loosen and remove the Allen head screw on the posterior lower leg pad: (see fig. 59,
item 1). Move the posterior lower leg pad to one of the 4 possible positions (see fig. 59, item 2) and firmly
retighten the Allen head screw.
3)
Angle adjustment:
Loosen the Allen head screw on the posterior lower leg pad (see fig. 60, item 1). Set the
desired angle and firmly retighten the Allen head screw.
4)
Width adjustment:
Loosen the Allen head screws on the posterior lower leg pad (see fig. 61, item 1). Slide
the posterior lower leg pad to the desired position (see fig. 61, item 2) and firmly retighten the Allen head
screws.
58
59
26
Settings
Motus CV, Motus CS
