Otto Bock Lisa HR32130000, Instructions For Use Manual

Page: 72 / 432

10 Technical data
INFORMATION
► Much of the technical data below is given in mm. Please note that product settings – unless otherwise spe­
cified – cannot be adjusted in the mm range but only in increments of approx.
0.5 cm
or
1 cm
.
► Note that the values achieved during adjustment may deviate from the values specified below. The deviation
can be
±10 mm and ±2°
.
Dimensions and weights Size 1 Size 2
Model version HR32130000 HR32140000
Overall width [mm] 605 655
Min./max. overall length
[mm]
1020 / 1220 1020 / 1220
Push handle height (height of the buggy)
[mm]
1030 1030
Front wheel diameter [mm] 180 180
Rear wheel diameter
[mm]
250 250
Folding size (LxWxH)
[mm]
1030 x 450 x 430 1030 x 450 x 430
Turning radius [mm] 1400 1450
Seat depth
[mm]
300 / 350 350 / 400
Seat width (with/without padding)
[mm]
360 / 320 410 / 370
Lower leg length [mm] 270–400 270–400
Seat height, front/rear
[mm]
500 / 380 520 / 380
Back support height
[mm]
650 700
Angle between back support and seat surface
(min./max.)
[°]
90–120 90–120
Seat angle
[°]
22 22
Max. load
[kg]
50 60
Weight [kg] 13.6 14
11 Appendices
11.1 Threshold values for rehab buggies transportable by train
INFORMATION
►
The products in this series fully satisfy the minimum technical requirements of regulation (EU) No. 1300/2014
regarding train accessibility for people with disabilities.
Feature Threshold value (according to Regulation (EU)
No. 1300/2014)
Length [mm] 1200 (plus 50 mm for the feet)
Width [mm] 700 (plus 50 mm on each side for the hands when mov­
ing)
Smallest wheels ["] approx. 3 or greater (according to the regulation, the
smallest wheel must be able to overcome a gap measur­
ing 75 mm horizontally and 50 mm vertically)
Height [mm] max. 1375; including a 1.84 m large male user (95th
percentile)
Turning radius [mm] 1500
Maximum weight [kg] 200 (product with user, including luggage)
Maximum obstacle height that can be overcome [mm] 50
Ground clearance [mm] 60 (at an upward slope angle of 10°, ground clearance
must measure at least 60 mm under the footrest for
going forward at the end of the slope)
Maximum inclination angle on which the product will
remain stable [°] 6 (dynamic stability in all directions)
9 (static stability in all directions, also when wheel lock
engaged)
72
Technical data
Lisa