64
65
6.6 Tray
For mounting the tray with the user seated, please see the instructions for use (user).
6.7 Canopy adapter
INFORMATION
►
The canopy adapter is required to mount the canopy on the seating unit. For information on attaching and
removing the canopy, see the instructions for use (user).
►
Before assembly of the canopy adapter, all components have to be removed from the frame tubes of the back
support insert (back support pads, existing supports). For information on attaching and removing the back
support pad, see the instructions for use (user).
If the canopy adapter was included, it is installed as follows:
1) Remove the back support pad from the frame tubes of the back support insert.
2)
If necessary:
Remove the thoracic supports (see page 24). Remove all other options screwed to the back sup
port insert (see fig. 66, item 2) and back support frame (see fig. 66, item 3) so the back support insert can be
removed.
3) Loosen the Allen head screws on the back support tubes (see fig. 66, item 1) and pull the back support insert
up and out.
4) Slide the canopy adapters with the proper side onto the tubes (see fig. 67).
5) Position the canopy adapters so they are level (see fig. 67).
6) Tighten the set screws on the canopy adapters.
7) Slide the back support insert back in and tighten the Allen head screws (see fig. 66, item 1).
8)
If necessary:
Install the thoracic supports (see page 24). Mount all options that were removed.
9) Attach the back support pad.
66
67
6.8 Rain cover
The installation is usually carried out by the user's attendant.
For mounting information, see the instructions for use (user).
28
Installing options/accessories
Kimba
