7.11.2 Using the seatbelts
WARNING
Incorrect adjustment/application of the seatbelts
Strangulation, suffocation because of failure to observe the specifications
►
The initial adjustments may only be made by qualified personnel.
►
Observe the information on correct adjustment/application in the instructions for use included with the seat
belt.
►
Always use the wheelchair in conjunction with correctly adjusted seatbelts.
►
After making a preliminary adjustment of the belt length, the final adjustment must be conducted in the pres
ence of the user.
►
If a medically correct positioning cannot be achieved by means of the belt adjustment, the attachment points
and brackets must be correspondingly moved.
The usage information that follows provides a brief overview of using the seatbelts. Detailed information on adjust
ment and use is provided in the instructions for use included with the seatbelts.
Lower leg strap, thigh strap, lap belt
1) Adjust the belt length by opening the catch and moving the ratchet strap (see Fig. 44).
CAUTION! At the most, pull the ratchet strap out so that 2 sections are still behind each catch.
2) Opening and closing during use is performed in the same manner.
44
Leg strap, chest strap
1) Adjust the belt length by opening and moving the hook-and-loop strap (see Fig. 45; see Fig. 46).
2) Opening and closing during use is performed in the same manner.
45
46
7.12 Protective pads (option)
For the protection of users, some components of the wheelchair can be equipped with protective pads:
•
Back bar pad (see Fig. 47)
•
Frame pad (see Fig. 48)
•
Anti-tipper pad (see Fig. 49)
24 | Ottobock
Use
Invader 480S26=20000_K
