Otto Bock Genium 3B1-2, Instructions For Use Manual

Page: 56 / 480

56
Thanks to the microprocessor-controlled stance and swing phase, the system can be individually
adapted to your needs.
For this purpose, the product is adjusted by qualified personnel using adjustment software.
The product features MyModes for special motion types (e.g. cross-country skiing, ...). These are
pre-configured by the prosthetist using the adjustment software and can be activated with special
motion patterns, the cockpit app and the remote control (optional accessory) (see Page 83).
In case of a system malfunction, safety mode makes restricted operation possible. Predefined
resistance parameters are configured in the product for this purpose (see Page 86).
Empty battery mode permits safe walking when the battery is drained. Resistance parameters that
are predefined by the product are configured for this purpose (see Page 86).
The microprocessor-controlled hydraulic unit offers the following advantages
• Approximation of the physiological gait pattern
• Stability while standing and walking
• Adaptation of product characteristics to various surfaces, inclines, gait situations and walking
speeds
4 Application
4.1 Indications for use
The product is to be used
solely
for lower limb exoprosthetic fittings.
4.2 Area of application
Area of application according to Ottobock’s MOBIS classification:
Knee joint with attached 2R20 AXON tube adapter
m°
kg
The product is recommended for mobility grade 2 (restricted outdoor walker),
mobility grade 3 (unrestricted outdoor walker) and mobility grade 4 (unrestricted
outdoor walker with particularly high demands). Approved for a body weight of up
to
150 kg (330 lbs)
.
Knee joint with attached 2R21 AXON tube adapter with torsion
m°
kg
The product is recommended for mobility grade 2 (restricted outdoor walker),
mobility grade 3 (unrestricted outdoor walker) and mobility grade 4 (unrestricted
outdoor walker with particularly high demands). Approved for a body weight of up
to
125 kg (275 lbs)
.
4.3 Conditions of use
The product was developed for everyday use and must not be used for unusual activities. These
unusual activities include, for example, extreme sports (free climbing, parachuting, paragliding,
etc.).
Permissible ambient conditions are described in the technical data (see Page 89).
The product is intended
exclusively for use on one user. Use of the product by another person is
not approved by the manufacturer.
4.4 Indications
• For users with knee disarticulation, transfemoral amputation and hip disarticulation (users
with hip disarticulation or hemipelvectomy have to be fitted with the 7E10=* Helix
3D
hip joint).
• For unilateral or bilateral amputation
• Dysmelia patients with residual limb characteristics corresponding to knee disarticulation,
transfemoral amputation or hip disarticulation