1.1 Construction and Function
This document applies to the following products: F23 Maverick Vertical
Shock
The prosthetic foot has fibreglass spring elements. The heel stiffness can be
increased with heel wedges.
The prosthetic foot has a functional ring. The functional ring absorbs vertical
impact loads and enables slight torsional movements.
1.2 Combination possibilities
This prosthetic component is compatible with Ottobock's system of modular
connectors. Functionality with components of other manufacturers that have
compatible modular connectors has not been tested.
Limited combination options for Ottobock components
The prosthetic foot generates high moments in the ankle area. Use structural
components with higher weight limits:
Body weight (high activity)
[kg]
up to
59
up to 77
up to 100
up to 130
Foot size [cm]
up to
26
up to
28
from
29
up to
28
from
29
up to 31
Structural component
weight limit [kg]
≥75
≥100
≥125
≥125
≥150
≥150
Body weight (normal
activity) [kg]
up to 100
up to 130
Foot size [cm]
from 29
up to 31
Structural component
weight limit [kg]
≥125
≥150
2 Intended use
2.1 Indications for use
The product is intended exclusively for lower limb exoprosthetic fittings.
2.2 Area of application
Our components perform optimally when paired with appropriate compo
nents based upon weight and mobility grades identifiable by our MOBIS
classification information and which have appropriate modular connectors.
m°
kg
The product is recommended for mobility grade 3 (unrestricted
outdoor walker) and mobility grade 4 (unrestricted outdoor walk
er with particularly high demands).
17
