7.3 Delivery
The following steps should be performed for the safe delivery of the wheelchair:
•
Seating trials were conducted with the user while adjusting the settings. Proper positioning according to med
ical aspects must once again be verified upon delivery (seating position, position of the arm rests/footrests).
•
In order to ensure that the seat tilt feature operates smoothly, final verification of the seating centre of gravity is
required with the seated user and the designated attendant; adjustments must be made if necessary. The seat
ing centre of gravity must be set so that the attendant can change the angle effortlessly.
•
Attendants and, if possible, the user must be instructed in the safe use of the wheelchair. In particular, the
enclosed Instructions for Use (User) are to be used for this purpose.
•
The Instructions for Use (User) must be provided to the user/attendant upon delivery of the wheelchair.
8 Maintenance/Repair
The manufacturer recommends regular maintenance of the product every
12 months
.
More information on cleaning/disinfection and maintenance/repair can be found in the instructions for use (user).
The service manual contains detailed information on repairs.
9 Disposal
9.1 Disposal information
In case of disposal, all components of the product must be disposed of in accordance with the respective national
environmental laws.
9.2 Information on Re-Use (Not for US/Canada!)
The product is suitable for re-use.
Similar to second-hand machines or vehicles, products that are being re-used are subject to increased strain. Fea
tures and functions must not change in a way that could endanger users or other persons within the product’s
lifespan.
Based on market observations and the current state of technology, the manufacturer has calculated that the
product can be used for a period of
5 years
, provided that it is used properly and that the service and maintenance
instructions are observed. Storage times at the dealer or with paying parties are not included in this period.
However, we would like to emphasise that the product is reliable far beyond this defined period of time, provided
that it is cared for and maintained properly.
The product must be thoroughly cleaned and disinfected by qualified personnel before it can be re-used. Then
check the condition of the product and inspect it for wear and damage. All worn and damaged components must
be replaced.
Detailed information on replacing components as well as information on the required tools and the prescribed ser
vice intervals can be found in the service manual.
10 Legal Information
All legal conditions are subject to the respective national laws of the country of use and may vary accordingly.
10.1 Liability
The manufacturer will only assume liability if the product is used in accordance with the descriptions and instruc
tions provided in this document. The manufacturer will not assume liability for damage caused by disregard of this
document, particularly due to improper use or unauthorised modification of the product.
10.2 CE Conformity
This product meets the requirements of the European Directive 93/42/EEC for medical devices. This product has
been classified as a class I device according to the classification criteria outlined in Annex IX of the directive. The
declaration of conformity was therefore created by the manufacturer with sole responsibility according to Annex VII
of the directive.
10.3 Warranty
Further information on the warranty terms and conditions is available from the manufacturer's service (see inside
back cover for addresses).
Ottobock | 27
discovery tmax
Maintenance/Repair