7.3 Repair
7.3.1 Replacing a defective fuse
INFORMATION
When replacing, only use fuses of the same type. Note the
rating printed on it.Note the rating printed on it.
The fuse (for values see section "Technical Data" > Table
"Electrical System") is located in a fuse holder underneath
the seat, next to the controller.
Removing the fuse
>
The control unit is turned off.
1) Open the fuse holder cover.
2) Pull the fuse out of the spring contacts.
Installing the fuse
1) Remove the new fuse from the protective cover.
2) Centre the fuse on the spring contacts and insert it.
3) Close the fuse holder cover until you feel it engage.
Fig. 41
Fuse holder, vertical (basic model); fuse holder, hori
zontal
1 Fuse holder
3 Fuse
2 Fuse cap
7.3.2 Replacing a defective bulb
NOTICE
Penetration of moisture
Risk of damage to the light
►
During installation, ensure that the plates are seated
accurately in the housing.
►
Ensure that the screws are seated tightly against the
plate.
Ottobock | 63
B400
Maintenance/Repair
Summary of Contents for B400b400
Page 1: ...Instructions for Use User B400...
Page 2: ......
