184
3.13.7 Retrofitting the Scissor Wheel Lock
Out front scissor wheel lock
1) Unscrew/remove the Allen head screws in the slide block on the bottom of the frame (see fig. 168).
2) Take off the knee lever wheel lock (see fig. 169).
3) Reposition the slide block in the area of the clamp fitting installation position. The existing set screw remains in
the slide block for guiding in the groove (see fig. 185, item 1). Secure the slide block with an additional, longer
set screw to keep it from shifting (see fig. 185, item 2).
INFORMATION: The slide block prevents crushing of the frame tube when tightening the Allen head
screws on the clamp fitting.
4) Install the clamp fitting on the frame tube using the mounting materials (see fig. 185).
5) Slide the scissor wheel lock into the wheel lock clamp and mount it (see fig. 186; see fig. 187).
6) Adjust the wheel lock (see Page 52).
Depending on the adjustment, it may be necessary to dismantle the support for the wheel lock and mount it in a
rotated position (see fig. 185, item 3).
INFORMATION: Use new Allen head screws or secure the existing Allen head screws with liquid
thread locking compound.
7) Tighten the Allen head screws on the clamp fitting to
15 Nm
.
185
186
51
Avantgarde CV / CS / CLT
Service Work
Summary of Contents for Avantgarde CLT
Page 1: ...Service manual Avantgarde CV CS CLT...
Page 61: ...61 Avantgarde CV CS CLT...
Page 62: ...Avantgarde CV CS CLT 62...