Otto Bock ActiGait, User Manual

Page: 28 / 69

27
7.1.8 Mute Indicator
With the mute functionality you can switch the audio signals of the Control Unit
on and off according to your preference. There are 3 different settings and the mute
indicator shows the current setting.
All sounds are on.
All sounds are on, except for the Heel Switch feed -
back.
All sounds are off, except for warnings.
See section 7.7 on page 42 for further information about the audio signals and
section 7.1.3 on page 19 about how to operate the mute button.
7.1.9 Stimulation Intensity Indicators
The row of light indicators on top of the Control Unit shows the current intensity
level of the stimulation. There are 7 light indicators so the stimulation intensity can
be adjusted in 7 steps. Your clinician will set the range within which you can adjust
the stimulation intensity with the Control Unit. See section 7.1.2 on page 18
about how to adjust the stimulation intensity.
7.2 Putting On the Control Unit
You should wear the Control Unit on your waist so that you can easily access it
while walking and sitting. You can use the three different Control Unit Fixtures to
attach the Control Unit to your clothing, a belt or your skin or you can carry it in
your pocket. The Antenna is available in two cable lengths so that you can choose to
carry the Control Unit at the affected side or the non-affected side.