Otto Bock 8E70, Instructions For Use Manual

Page: 28 / 32

28
Serial number (YYYY WW NNN)
YYYY – year of manufacture
WW – week of manufacture
NNN – sequential number
Article number
Medical device
Protect from moisture
12.3 Operating states/error signals
The prosthesis indicates operating states and error messages through beeps and vibration sig­
nals.
12.3.1 Beep and vibration signals
INFORMATION
Feedback signals can be turned off
When the feedback signals have been turned off in the adjustment software, the beeps and/or
vibration signals are not generated in certain cases (see table). Signals in case of a product
error are generated even when the feedback signals have been turned off.
Beep signal Vibration signal When Signal can be
deactivated Function
1x short 1x short After releasing
the program
switch
Yes
Switching
between primary
and secondary
grips
1x short 1x short After releasing
the program
switch Yes Hand is switched
on
1x short 1x short While pressing
the program
switch No Bluetooth func­
tion is deactivated
1x short 1x short While pressing
the program
switch Yes Donning mode
was activated
2x long 2x long While pressing
the program
switch
No
Bluetooth func­
tion is activated
3x short 3x short After successful
data exchange
with the PC
No
The configuration
was transferred
from the terminal
device to the
adjustment soft­
ware