Depending on the model and version, malfunctions and faults of components relevant for safety as well as status
messages of individual components are recorded. The data are available in anonymised/pseudonymised form
when the data storage modules are read in case of service. Ottobock stores, processes and uses the data accord
ing to the applicable data protection regulations.
For detailed questions please contact: [email protected]. For questions regarding treatment, please con
tact the qualified personnel.
10.4 Lifetime
Expected lifetime:
5 years
The design, manufacturing and requirements for the intended use of the product are based on the expected life
time. These also include the requirements for maintenance, ensuring effectiveness and the safety of the product.
11 Technical data
INFORMATION
►
Much of the technical data below is given in mm. Please note that product settings – unless otherwise spe
cified – cannot be adjusted in the mm range but only in increments of approx.
0.5 cm
or
1 cm
.
►
Note that the values achieved during adjustment may deviate from the values specified below. The deviation
can be
±10 mm and ±2°
.
Application class (according to DIN EN 12184)
Class A
Application class (according to DIN EN 12184)
Class B
Drive type
Rear-wheel drive
Weight (minimum/maximum)
Minimum: 93.5 kg (206 lbs)
Maximum: 180 kg (397 lbs)
Weight*
Equipped with standard seat
From 93.5 kg (from 206 lbs)
Maximum gross weight
See nameplate for precise information
* The specified weights vary according to the accessories and selected model.
Weight*
Equipped with VAS seat
From 103.5 kg (from 228 lbs)
Maximum gross weight
See nameplate for precise information
* The specified weights vary according to the accessories and selected model.
Load
Maximum load
(User luggage)
160 kg (352.7 lbs); the load is reduced depending on equipment
Dimensions – standard seat Junior
Effective seat depth*
340–400 mm (13.4"–15.7")
Effective seat width*
340–400 mm (13.4"–15.7")
Front seat height*
380–500 mm (15"–19.7")
Lower leg length**
150–470 mm (5.9"–18.5")
Back support height
370/420/470 mm (14.6"/16.5"/18.5")
* In increments of 20 mm
** In increments of 10 mm
Dimensions – standard seat, small
Effective seat depth*
380–460 mm (15"–18.1")
If equipped with contour pads: 360–440 mm (14.2"–17.3")
117
490E75=1_C
Technical data
Summary of Contents for 490E75 1 C Series
Page 1: ...Instructions for use user 3 490E75 1_C ...
Page 2: ...2 490E75 1_C ...
Page 126: ...490E75 1_C 126 ...
