C-Leg compact Prosthetic System
Ottobock | 31
3 Alignment and Adjustment
3.1 Connecting the Tube Adapter
1
2
3
4
1
Mount the foot to the tube adapter (lightly tighten the screws).
2
Plug the tube adapter plug into the knee joint (only one polarity possible).
3
Push the protruding cable into the tube and push the tube adapter into the C-Leg compact. In doing so, take care
to achieve the minimum insertion depth (see following table).
max. 75 kg
50 mm
max. adjust-
ment range
75 kg – 100 kg
45 mm
max. adjust-
ment range
100 kg – 125 kg
40 mm
max. adjust-
ment range
CAUTION
Error during alignment of the prosthesis.
Errors during the alignment of the prosthesis can lead to mal-
function of the joint up to loss of function due to structural failure. This can cause the patient to fall. With the 3C96-1
and 3C86-1 models, the scaling must be positioned in front of the tube. The 2R80=110 Tube Adapter is approved for a
maximum weight of 100 kg / 220 lbs.
4
Turn the foot slightly outward (adjustment range ±30° to suit the needs of the patient) and pre-fasten the screws
lightly at the tube clamp.
