Otto Bock 2R40 Series, Instructions For Use Manual

Page: 11 / 120

CAUTION
Mechanical damage to the product
Risk of injury due to change in or loss of functionality
► Use caution when working with the product.
►
If the product is damaged, check it for proper function and readi­
ness for use.
► In case of changes in or loss of functionality, do not continue
using the product (see "Signs of changes in or loss of functional­
ity during use" in this section).
►
Take any necessary measures (e.g. repair, replacement, inspec­
tion by the manufacturer's customer service, etc.).
Signs of changes in or loss of functionality during use
Among other factors, changes in functionality can be indicated by an
altered gait pattern, a change in the positioning of the prosthetic com­
ponents relative to each other and by the development of noises.
4 Scope of delivery
Quantity Designation Reference num­
ber
1 Instructions for use –
1 Adapter –
Only for 2R41=*, 2R48 tube adapter
4 Set screw 506G3=M6x10
Spare parts/accessories (not included in the scope of deliv­
ery)
Quantity Designation Reference number
636W28 Special adhesive with hardener
636W18 and 636W19
Single component pack for 2R40=1 con­
sisting of: 1 cap screw, 1 flat washer 2D6=M8
11
Spare parts/accessories (not included in the scope of deliv­
ery)
Quantity Designation Reference number
Single component pack for 2R40=2 con­
sisting of: 1 cap screw, 1 flat washer 2D6=M6
5 Preparing the product for use
CAUTION
Incorrect alignment or assembly
Risk of injury due to damaged prosthetic components
►
Observe the alignment and assembly instructions.
CAUTION
Improper assembly of the screw connections
Risk of injury due to breakage or loosening of the screw connec­
tions
►
Clean the threads before every installation.
► Apply the specified torque values.
► Follow the instructions regarding the length of the screws and
about how to secure the screws.
5.1 Installing the foot adapter
> Required tools and materials: Grinding tool, 710D20 torque
wrench, degreasing cleaning agent (e.g. 634A3 acetone), special
adhesive and hardener (see Page 11, table of spare
parts/accessories)
1) For prosthetic feet with wooden components, roughen the con­
nection surface and remove the grinding dust.
2) INFORMATION: The foot adapter has to be glued to the
prosthetic foot. Use the specified special adhesive for this
purpose.
Mix the special adhesive and hardener well together and apply to
the connection surface.