Otto Bock 1B1-2 Meridium, Instructions For Use Manual

Page: 56 / 776

1) Turn the prosthesis by 180° (the sole of the foot must face up).
2) Hold the prosthesis still and wait for beep signals.
Prosthetic foot with knee joint:
The beep signal for the knee joint sounds after approx. 2 seconds.
The beep signal for the prosthetic foot sounds after approx. 4 seconds.
Prosthetic foot without knee joint:
The beep signal for the prosthetic foot sounds after approx. 2 seconds.
Beep signal Vibration signal Battery charge level
5x short – More than 80%
4x short – 66% to 80%
3x short – 51% to 65%
2x short – 36% to 50%
1x short 3x long 20% to 35%
1x short 5x long Less than 20%
INFORMATION
If the
Volume
parameter is set to '0' in the Cockpit app, there are no beep signals (see page 68).
Display of the current charge level using the cockpit app:
Once the Cockpit app has been started, the current charge level is displayed in the bottom line of the screen:
1. 38% – Charge level of battery for currently connected component
7 Preparing the product for use
7.1 Applying/removing footshell
For applying/removing the footshell, please consult the instructions for use included with the footshell.
CAUTION
Incorrect assembly/disassembly and improper use of footshell
> Falling due to unexpected product behaviour as the result of malfunction.
> Falling due to breakage of load-bearing components.
► Use the prosthetic foot only in combination with the footshell.
► Remove the footshell from the prosthetic foot only when necessary.
►
Only use the 2C101 changing device and the 704G30 clamping device for mounting/removing.
► Replace worn footshells. Do not use the prosthetic foot when the footshell is damaged.
INFORMATION
Before mounting the component on the tube adapter, make a note of the serial number of the component. It is
found next to the pyramid on the spherical cap (see page 45).
The serial number is required to connect to the adjustment software and the Cockpit app and must be entered in
the prosthesis passport.
56
Preparing the product for use
1B1-2=* Meridium