PL0015
REV031513
LED Cone Desk Lamp
Lampe de bureau DEL en forme de cône
Lámpara de escritorio “cónica” LED
286SV9 28600C
C
D
D
A
E
F
B
100% Delighted…Guaranteed.
You’ve got your OttLite product—sweet! It’s
important to us that you are 100% delighted
with our products from day one and beyond.
Register your product using the enclosed
Product Registration Form or online at
warranty.
ottlite.com
, and if anything ever happens to
your OttLite we’ll be able to help you lickety-split.
LAMP ASSEMBLY
NOTE: THIS UNIT IS FULLY ASSEMBLED
1.
Remove lamp from packing placing lamp
body base
(A)
flat on a steady surface.
2.
Connect the AC Adapter
(E)
into input
(D)
located in the rear of the base
(A)
.
3.
Plug the A/C adapter
(E)
into a standard
household 120V AC outlet.
4.
Turn the lamp ON & OFF using power switch
(F)
located near plug of A/C adapter.
5.
To position the shade simply bend the Flex-
Neck
(B)
as needed to point the light. To
avoid damaging the lamp, DO NOT force the
Flex-Neck into a sharp bend.
SAFETY WARNING: TO REDUCE THE RISK OF
FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS
1.
Turn off/unplug and
WAIT UNTIL BULB / LAMP
HEAD IS COOL
before handling.
2.
Bulb gets hot quickly! Touch only switch/plug
when turning ON or OFF.
3.
Never use with an extension cord unless the
plug can be fully inserted into the receptacles
in the extension cord.
4.
Do not alter the plug.
5.
The bulb included with this unit cannot be
replaced by the consumer.
NOTE:
The important safety instructions
appearing in this instruction sheet are not
meant to cover all possible conditions
and situations that may occur. It must be
understood that common sense, caution, and
care must be used with any electrical product.
CAUTION!
If the external flexIble cable or cord of thIs lumInaIre Is damaged, It shall be exclusIvely replaced
by the manufacturer or Its servIce agent or a sImIlar qualIfIed person In order to avoId a hazard. Indoor use only.
FCC PArT 15
Note:
this equipment has been tested and found to comply with the limits for a class b digital device, pursuant to part 15 of the fcc rules. these limits are
designed to provide reasonable protection against harmful interference in a residential installation. this equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. however, there
is no guarantee that the interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• connect the equipment into an outlet on a circuit different from that of the receiver.
• consult the dealer or an experienced radio/tv technician for help.
CautioN:
any change or modification to product not expressly recognized by ottlite technologies voids ottlite’s responsibility for proper function of product.
this class b digital apparatus complies with canadian Ices-003.
AC/DC ADAPTEr
Input: ac 100-240v, 50–60 hz
output: 13.2v dc 280ma with female dc plug
ENGLISH
