ENGLISH
2. Re-setting the boil dry safety shut off.
- Wait 5 minutes for the kettle to cool, and then refill with water. Push the
ON/OFF switch, and after about 25 minutes the kettle will automatically
re-set itself, and start to boil.
3. Kettle does not work.
- Check that the power supply is switched on the wall socket.
- If the kettle has boiled dry the safety shut off will have activated (see
paragraph above)
4. Water has a funny taste.
- Generally this only occurs after the first use, and is not a problem if the
water boiled on the initial use is discarded as recommended in the section
“Before first use”. If the problem persists, fill the kettle to the “MAX” level,
and add 2 teaspoons of sodium bicarbonate. Boil and discard the water.
5. Kettle forms scale inside and/or water turns cloudy.
- If you live in a hard water area this is normal, and is caused by calcium
and magnesium carbonates in the water, and therefore regular descaling
will be essential. If you wish to find out more about the type of water in
your area, your local water company can give you advice.
5
