Page 14
24. On the front of the fi shhouse, start in the corners and work inward, snap the plastic trim seal on the canvas tent
(Item 2) to the
lip
edge of the sled (Item 1). The tent (Item 2) will meet in the middle and should be free to open
and close so it can be removed.
Start here and
work inward
Back
Left Side
Front
Right Side
General Note: Be careful with tent windows in cold weather, as creasing or crushing them will cause breakage.
Caution: Use adequate ventilation. Portable heaters use up oxygen and emit carbon
monoxide. Use refl ectors and identifying lights after dark or during limited visibility.
Start here and
work inward
2
1
To Collapse Tent and Transport:
1. Remove support poles and store inside the sled.
2. Retract main frame bars by pressing in button while
sliding the bar farther into the tube.
3. Fold the tent in towards the sled so all the bars are
laying on top of the sled.
4. Tuck in excess tent material.
5. Ready for transport.
6. Reverse to set up the fi shhouse again.
Velcro attaches
at this point
Fold tent inward
towards sled.
Trim seal
Self-tapping screw
Detail A
29
Left Side
Back
1
Line up seam
on the corner
NOTE: Check for proper fi t of canvas
before installing screws in trim lock.
Trim seal
attaches here
