Page
53
of
248
To create a new station, select “New Station” at the top of the station list (1). Then set the Station Type
(2) to match your type of XLink, set “Connect type” (3) to Wi
-Fi, USB, Serial or Modem, and press Connect
(4). Additional information on the Wi-Fi, USB and modem connections are provided in the next sections.
You can set the software to get recent data (5). “Get recent data on connect”, when checked, will cause
LinkComm to download the last week of data for display in a graph on the dashboard tab, every time you
connect to the station. This can be a considerable amount of data (several k-bytes). You may choose to
disable this feature to reduce data costs (e.g., when communicating over cellular links).
Th
e “Check setup on connect” option (visible only for low bandwidth connections like “Redirector”), will
cause LinkComm to retrieve the setup from station every time you connect. You may choose to disable
this feature to reduce data costs (e.g., when communicating over cellular links).
6.3.1
Connecting via USB
LinkComm can connect directly via a USB cable. Connect a USB cable from your computer to XLink and
select “USB” as the Connect type.
You will need to pick the appropriate USB device:
1
2
3
4
5
Summary of Contents for SUTRON XLINK 100
Page 230: ...Page 230 of 248...
Page 247: ...Page 247 of 248...