OT Systems Ltd. | www.ot-systems.com
Quick Installation Guide
ET2212Pp-S-DR/ version 2.2
PoE Output
IEEE 802.3af/at, per port 30W, 1/2(+), 3/6(-)
Setup and States
a)
Connect the Ethernet port of the media converter to a PoE IP camera (PoE device) or network
device with a network cable.
b)
Insert the appropriate SFP into the SFP port. Connect the fiber cable from the device (media
converter or switch) on the other end to the LC connector of the SFP.
c)
After the device is powered on, the PWR indicator will all be on. If the indicators are not on,
check the power supply connection.
d)
After all cables are correctly connected, the indicators will be lit as per port status LEDs.
e)
LED
Indicators
Description
Power :PWR
ON
POWER ON
OFF
NO POWER input
SFP port
：
LK/ACT
ON
SFP connected
Blink
Transmitting or receiving data
OFF
SFP disconnected
LAN port states
（
Yellow
）
ON
Connected
Blink
Transmitting or receiving data
OFF
Disconnected
LAN port
（
Green
）
ON
POE ON
OFF
POE OFF
FALL
Blink
Operating
Power in 1
1
Power in 2
1
