9.5
Communicating and synchronizing with OTOsuite
From MADSEN OTOflex 100
When MADSEN OTOflex 100 is within range of OTOsuite and you click the
Select Device
icon in the Immittance module,
it connects while the transfer is active and then disconnects. If online, it uses the already established connection.
From OTOsuite
When you click
Select Device
in the Immittance module, the data is synchronized.
If the Patient Folder in the Immittance module and MADSEN OTOflex 100 are not the same, you will be prompted to
select the Patient Folder you would like to continue with. See
.
9.5.1
Synchronizing data
Synchronizing Patient Folders
Data is usually transferred from MADSEN OTOflex 100 to OTOsuite. Data is never deleted without confirmation from the
user.
Note
•
Only the Patient Folder currently shown in MADSEN OTOflex 100 will be transferred to OTOsuite during
synchronization. Other Patient Folders made while MADSEN OTOflex 100 was off-line must be transferred manu-
ally.
Synchronization takes just a few seconds and is usually initiated automatically when MADSEN OTOflex 100 connects to
OTOsuite.
•
Select from the dialog box shown.
Each test is identified by a time stamp, patient
name, gender, date of birth, the type of test done
on a specific ear, and the name of the user who
performed the test.
The test types are abbreviated as in the following:
•
T = Tympanometry
•
RT = Reflex Threshold
•
RS = Reflex Screening
•
RD = Reflex Decay
•
ETF-P = Eustachian Tube Function - Perforated
If data is already available in OTOsuite, you will be prompted to either overwrite the data or cancel.
Synchronization of corrections made to Patient Folders
If you have made changes to for instance reflex thresholds or tympanometric classification values, either in MADSEN
OTOflex 100 or in the Immittance module, these will be synchronized.
Otometrics - MADSEN OTOflex 100
87
9 Managing Test Results in MADSEN OTOflex 100
