otometrics AURICAL Aud Reference Manual Download Page 94

Page: 94 / 136

•

Read the OTOsuite user documentation before you connect or use AURICAL Aud for the first time.

AURICAL Aud is fully assembled on delivery, and you simply have to connect cables.

If AURICAL Aud is to be mounted under the desk top or on the wall, mount the mounting plate under the desk or on the
wall, and click AURICAL Aud onto the mounting plate. See

Desktop or wall installation

►

5.7

Desktop or wall installation

External power supply cable

USB cable between AURICAL Aud and the PC

Note

•

Connection cables for accessories connected to AURICAL Aud are not shown. See

Connection panels

►

You can place AURICAL Aud on the desktop, or hang it under the desktop or on the wall.

On the desktop

1. Place AURICAL Aud on the desktop.

2. Follow the instructions in

Connecting accessories and PC to AURICAL Aud

►

Under the desktop or on the wall

Mount a mounting plate under the desktop or on the wall, and attach AURICAL Aud to the mounting plate.

Tools are needed for mounting the mounting plate.

Note

•

Make sure that you use screws specifically suited for the type of surface on which you will be hanging

AURICAL Aud.

1. Mount the mounting plate securely on the wall or under the desktop.

2. Fit the screws through the slots marked by the arrows.

3. Click AURICAL Aud onto the mounting plate.

Otometrics - AURICAL Aud

5 Unpacking and Installing

Summary of Contents for AURICAL Aud









































































































































Search results

Summary of Contents for AURICAL Aud

Reviews:

Brands by name

Popular brands

otometrics AURICAL Aud, Reference Manual

Search results

Summary of Contents for AURICAL Aud

Reviews:

Brands by name

Popular brands