otometrics AURICAL Aud Reference Manual Download Page 107

Page: 107 / 136

1. Make sure that AURICAL Aud is connected in OTOsuite. (Select your device in the configuration wizard.)

2. Make sure that the firmware is up-to-date. (Open the Audiometry control panel. If there is new firmware, you will be

prompted to update it.)

3. Close OTOsuite.

4. If possible, place someone (for example, yourself, a client or an assistant) in the intended client location.

5. Make sure that the microphone is placed as described in

Microphone placement for use with RoomTune

►

106

6. Select RoomTune in the Windows

Start

menu.

The RoomTune application will then run in the background and you can access it from the system tray.

The RoomTune icon in the system tray

9.3

Using RoomTune in a new environment

Before using AURICAL Aud speaker or speakers in a new environment, you must run

Full RoomTune

. You should also use

Full RoomTune

if you make significant changes to the environment, such as moving the position of the speaker or adding a

large number of people to the room.

Once you have done the steps described in

Preparing to use RoomTune

►

106

, you can do the following:

1. Click on the RoomTune icon to open the context menu.

2. Click

RoomTune Settings

to open the application window.

Otometrics - AURICAL Aud

107

9 Tuning the AURICAL Aud speaker for use with third-party applications

Summary of Contents for AURICAL Aud









































































































































Search results

Summary of Contents for AURICAL Aud

Reviews:

Related manuals for AURICAL Aud

Brands by name

Popular brands

otometrics AURICAL Aud, Reference Manual

Search results

Summary of Contents for AURICAL Aud

Reviews:

Related manuals for AURICAL Aud

Brands by name

Popular brands