otometrics ABR Screener User Manual Download Page 74

Page: 74 / 108

9.3

Language setting

1. Press the

Language

button on the

Settings

screen.

2. To change the language on AccuScreen, press the button with the preferred lan-

guage.

Note

•

Your screen showing the available languages may not appear as the one

shown.

9.4

Sound setting

1. Press the

Sound

button on the

Settings

screen.

You can switch sounds on/off for button strokes and test results by pressing the rel-
evant button.

Sound on

–

Key click

Pressing a button will produce a sound (a click)

–

Result sound

Pass/Clear Response

Refer/No Clear Response

sound is

heard at the end of the test.

Sound off

Shows that the sound is disabled.

Otometrics - MADSEN AccuScreen

9 AccuScreen settings

Summary of Contents for ABR Screener













































































































Search results

Summary of Contents for ABR Screener

Reviews:

Related manuals for ABR Screener

Brands by name

Popular brands

otometrics ABR Screener, User Manual

Search results

Summary of Contents for ABR Screener

Reviews:

Related manuals for ABR Screener

Brands by name

Popular brands